Last year it was time for new Christmas stockings for the kids. H was staying with her Mom on Christmas, so I knew I needed – at a bare minimum – two stockings done by Christmas Morning.
I went out hunting for fabric and wanted something different, that I knew I would like for several years. I spied some cute gold fabric with sequins on it, and pictured it with a white fur cuff at the top. I loved the look, but the fabric was a jersey knit which means that as it was loaded up with presents, it would stretch out.
I quickly found some quilted batting type material, and thought that would make a cute lining for the knit fabric, and would protect it from stretching. I bought enough of all 3 fabrics to make 6 stockings: One for each kid, one for each parent, and a spare for any future Spivey Baby we might have.
Prior to Christmas, I was able to knock out two stockings, but couldn’t find the type of monograms I wanted for the cuffs. I didn’t want to do full names, but just a first initial for each. I decided to forego an initial for that year and just put small tags on each stocking with names.
This year it’s time to crank out the rest, and I want them initialed before Christmas. Of course, I pitched the home-made pattern I had made for last year. I can’t fathom why I would have done that and I’ve been kicking myself all week for it… but I was able to quickly make another using measurements from last years stockings.
This week I set to cutting out the pieces for each stocking, which is probably one of the most time consuming parts, so I thought I would share the pattern and how to assemble them for anyone interested. It’s very simple, quick, and you can fancy them up however you please! Not including fabric cutting time, I timed how long it too me to make one stocking, start to finish. Without distractions, it took me 27 minutes and 10 seconds to do one full stockings. Granted, I’ve made a few at this point and know how to do it, but that does give you an idea as to how simple this project is.
Before we get started, I’m just going to keep it real and say “don’t judge my table”. This is my $5 craigslist find that is used and abused for all of our messiest crafts, to save our prettier surfaces from the wear and tear. I promise you this isn’t what my real furniture looks like! 😉
First things first. Print out the Pattern located HERE.
Cut it out and assemble as directed.
(Note: Since I had to use a lining b/c my outer stocking fabric was stretchy, there were a few extra steps. Those steps will be noted in Blue with a ** around them. If you don’t use a lining and instead just do one layer, please disregard those steps)
Lay out your fabric and cut out 2 pieces of your cuff fabric, and 2 pieces of your stocking material.
**If you have to (or just choose to) use a lining like I used, cut out 2 of those too.**
Lay stocking pieces with right sides together.
**If using lining, pin lining to “wrong” sides of fabric, then take each set of fabric pieces and place them “right sides” together.**
Using your sewing machine, run a straight stitch around the sides and bottom of the stocking, leaving the top open. Your stitch should be about 1/4-1/2″ away from the edge.
Take Cuff pieces and place right-sides together.
Sew along both “long” edges, making a tube.
Turn stocking right side out.
Determine where on your stocking you want the cuff to start. Mark that line using pins. Leaving cuff wrong-side out, slide down over the stocking, lining up one end of the “tube” slightly higher than your marked line on the stocking. Pin in place.
Using your sewing machine, sew a straight stitch along your marked line.
Now, when you turn your cuff right side out and fold it into itself, it might be a bit bulky… This next step is optional, but i had better luck when I did go ahead and do this (and it only took a few extra seconds.). Inside of the line you already stitched along the long edges of the cuff, sew a second line. It will be at an angle, making the open side of the cuff slightly more narrow than the part that is sewn onto the stocking. You can see better below, what I mean.
Flip cuff up, revealing right-side.
Fold excess down into the stocking until you have a 5″ tall cuff (or larger if you prefer). Once measured, pin, turn cuff down over stocking, and sew a running stitch along the bottom edge of the cuff to the hidden seam allowance inside of the stocking. This will keep it from unfolding when gifts are removed.
Flip cuff back up, revealing your finished stocking!
You can also use a small piece of fabric to add a loop to hang your stocking on.
From here you can embelish how you want. I have a friend who is embroidering some initials for ours, and those will be added soon. In the meantime, I’m just glad the stockings themselves are done!
I hope you enjoy the tutorial and pattern. If you make a stocking, please share a link to your blog post about it in the comments here. I always love finding new blogs to read. Or if you Instagram it, please tag @Jackie_reivey so I can see it there! Happy Holidays!